Turf Products
Tour-Putt™ Ultimate
Model (TPN2-ATR)
Simulates PGA Tour Greens
For tour putting with short chip shots
|
The ultimate putting surface
Will accept a short chip shot
Multi-color design for a more realistic, natural look
Special water-proof rubber backing (for soft and true putting)
Short spring-set/textured NYLON fibers to create a "true bent-grass" surface
Stimps out at 10.5 to 12 (like most PGA tour greens)
Has no grain pattern (putts the same in any direction)
10-year limited residential warranty
5-year limited commercial warranty
|
Golf Course Turf
Model (MGCT)
Simulates country club putting greens
For all around chipping and putting.
|
Our best putting surface that will accept a long approach or chip shot
Multi-color design for a more realistic, natural look
Special durable shock absorption action backing
Requires partial in-fill to deaden the "ball-bite" for approach/chip shots
Longer spring-set/textured fibers that grab the ball when chipped onto
Stimps out about 8 to 10 (like most country club greens)
Has natural grain pattern, resembling real grass greens
10-year limited residential warranty
5-year limited commercial warranty
|
| Tee-Line Turf
Model (TLT)
For fringe, tee-boxes or driving ranges, lawn grass
|
This turf will accept a real tee and full-swing shots
Darker single color for a realistic tee-box look
Unitary back with Stitch Lock
Requires partial in-fill and periodic maintenance
Two inch tall spring-set/textured, interlocking fiber design
Lasts longer than hitting mats
|
| FringeGrass/Lazy Lawn
|
Multi-color design for a more realistic, natural look
Longer fibers to create a more natural look
Can be in-filled for long distance target greens
|
| Optional Features
|
Bunkers and chipping pads
Lighted flag sticks
Concrete, brick, or rock Edging
Custom flags, ball washers, and benches
Driving nets and cages
|
| Note: To assure non expansion and contraction, the turf is designed to be directly glued down on our Florathane Compacted Aggregate Base, Cement Base/Pad, Asphalt Surface, or Tour Links Bases . All loose laid turf installed over compacted aggregate must be partially in-fill weighted. Adding a layer of our special round quartz in-fill will assist in deadening ball bounce for long approach and chip shots. Stimp speed readings are realistic estimates, but actual stimp speed will vary according to installation method, turf model, and per each production run.
|
TOUR PUTT® ULTIMATE
Mirage Putting Greens International manufactures its own turf!
Most putting green dealers purchase their turf from third party vendors. Mirage is the innovator and manufacturer of their own turf products. Each year Mirage continues to enhance the development of their turf products.
Tour Putt® Turf has no equal when it comes to ball bite!
When attempting a short chip shot anywhere from 3 to 30 feet off the putting surface - the ball has more of a horizontal trajectory as it hits the green. Due to this characteristic, it is very important that the surface "grabs" the spin of the ball in order to create a bite. Since the Tour-Putt® Turf does not have heavy sand fill which will create a skip with this angle of trajectory, the ball will bite and check up just like a real green!
Tour Putt® Turf has no equal when it comes to ball role!
The ball roll of the Tour Putt® Turf surface is far superior to any sand filled green. The sand in these systems can shift, settle, and become uneven. This will severely affect the way the ball rolls. Also, if you live in damp areas, mold can develop in the sand. Since the Tour Putt® Turf does not require any sand infill, there is nothing to disrupt the roll of the ball.
Tour Putt® Turf has no equal when it comes to maintenance!
The best way to maintain the Tour-Putt® system is to vacuum or sweep it. Deep sand filled turf requires re-filling, re-top dressing, and rolling to keep the fibers bent and the sand level even. After a period of time, foreign particles such as dirt, leaves, grass, and gravel can imbed themselves into the sand layers. These objects will disrupt the surface and create a ball-hop and skip that will throw your putts off-line. With our Tour Putt® Turf you can use a hose to wash off any accumulated dirt.
GOLF COURSE TURF
The Golf Course Turf is ideal for hitting shots to the green from greater distances and affords the owner an excellent practice green with minimal maintenance. Our Golf-Course Turf® is the proper way to create a loose laid green with a non-compacting, non-abrasive in-fill. The interlocking fiber technology locks in the in-fill, holds down the turf and provides a layer to absorb longer chip shots. It also provides an excellent surface for smooth putting.
TEE LINE TURF
Our highest density Tee Line Turf can be used in Chipping Areas, as chipping mats, as Fringe, or for plush synthetic lawn grass. This turf requires in-fill that does not compact or abrasive.
FRINGE GRASS\LAZY LAWN
This synthetic turf technology can be used to replace real grass lawns and is easily maintained with a leaf blower. It is also used as fairway and fringe grass on custom designed putting greens.
OPTIONAL FEATURES
|
